As a part of the packaging, the aluminum-plastic cover has the following main functions:
1. The airtightness fully guarantees the quality of antibiotics, which is the most important function of antibiotic aluminum-plastic composite covers, and is also the most basic requirement for manufacturers.
2. Aesthetics, which can highlight the personality of antibiotic drugs, beautiful and generous, and play a finishing touch on product packaging.
3. Antibiotic aluminum-plastic bottle caps will not deteriorate the drug, which fully guarantees the safety of the patient and is responsible for the patient.
Standards for aluminum-plastic lids:
1. Sterilization resistance: Take an appropriate amount of aluminum cover, and after 1 hour of hot air at 180°C, there should be no obvious change on the surface, and there should be no bulge or detachment on the surface layer.
2. Compatibility: Take an appropriate amount of aluminum cap that has been subjected to 180°C hot air for 1 hour, and cover it on a suitable bottle with nominal capacity of water, and seal it with a capping device. It should be suitable.
3. Coating firmness: Take an appropriate amount of aluminum cover that has been heated by 180°C hot air for 1 hour, and after steam sterilization at 121°C±2°C for 30 minutes, wipe the surface with absorbent cotton soaked in 80% (V/V) ethanol solution for 30 seconds, and then Wipe the surface with absorbent cotton soaked in 70% (V/V) isopropanol solution for 30 seconds, the coating should be free of any abrasion.
Post time: Apr-18-2023