The aluminum anti-theft bottle cap is easy to open without special tools. If the bottled wine is not finished at one time, the aluminum anti-theft bottle cap can be simply screwed tightly. The gasket of the aluminum anti-theft bottle cap, the part in contact with the wine is a PVDC coating with a thickness of 0.20μm, which is characterized by stable quality, acid and alcohol resistance, and meets the food hygiene packaging standards and the US FDA requirements. Keep the wine fresh.
The production process of aluminum anti-theft bottle caps is aluminum plate - coating printing - stamping - rolling printing and glazing - knurling - padding - counting and packaging. Each process can realize mechanized mass production with high output.
Expert conclusion
Wines sealed with aluminum screw caps taste better than wines sealed with corks.
This conclusion was drawn from an expert wine tasting organized by Wine International. Wine International organized the tasting to settle the debate surrounding cork versus screw cap. The wine tasters hired by the organizers are all internationally renowned wine tasting experts, including Penfolds' famous wine consultants Michel Rolland and Peter Gago. The experts tasted 40 wines, each of which was sealed in four forms: natural cork Stoppers, synthetic corks, screwcap caps and regular wine caps. As a result of the tasting, experts gave 21 of the wines that were sealed with screw caps positive reviews. The 1996 Australian Penfolds, sealed with screw caps, was one of the top scorers, with 77% of the reviewers giving it a high rating.
About processing and protection of aluminum plate after printing (aluminum anti-theft cover)
After the aluminum plate is printed, because the adhesion of the ink on the surface of the aluminum plate is low, and the aluminum plates collide and squeeze each other during transportation, it is very easy to destroy the overall effect of the printed pattern, so the post-processing of printing is particularly important. Combining reality with reality, there are two key processes for processing aluminum sheets - glazing and packaging.
Glazing, also known as overglazing, is to coat a layer of varnish on the surface of the printed pattern, like a protective net, to enhance the adhesion of the ink and protect the printed pattern from scratches. After glazing, the pattern hardness and brightness increase. , the visual effect is better.
Packing method: A smooth wooden pallet is used at the bottom of the ordinary printed aluminum plate to prevent the aluminum plate from becoming soft due to its quality.
Post time: Sep-29-2022